Innovative forks with wheels for aeration and tillage 50 cm wide
|
|
The tool is made of structural steel, iron (moving part and end parts) and flexible steel (fork).
Colour: powder coating or plastic coating Hue: orange / brown, green / brown
Maximum penetration depth: 24/24 cm Number of stabbing forks: 6/7
Total dimension of the assembled tool: 67 x 50 x 25 / 67 x 60 x 25 cm Working width: 50/60 cm
Tool weight without handles: 9.6 / 10.3 kg Suitable size of wooden handle: 130 x 4 cm (2 pieces)
The set does not contain wooden handles.
After each use, the tool must be cleaned, dried and stored in a dry place. If you are not planning to use the tool for a longer period of time, coat the tool with suitable oil. Keep the product out of the reach of children due to sharp parts (forks).
The tool is used for root trimming, digging, soil crushing, and aerating of working surface. It can be used without a front end (10) when only aeration and digging (without crushing) is desired, which is suitable for winter tillage.
When using it for hard soil, it is important to first pin the forks only to half the depth by breaking up the hardened part, then moving back a few inches, depending on the hardness of the ground. If you come across harder objects (root, stone) DO NOT continue to work by force, otherwise deformation and damage to the tool may occur.
Tool assembly (detailed pictorial description on our website).
|
|
The tool is made of structural steel, iron (moving part and end parts) and flexible steel (fork).
Colour: powder coating or plastic coating Hue: orange / brown, green / brown
Maximum penetration depth: 24/24 cm Number of stabbing forks: 6/7
Total dimension of the assembled tool: 67 x 50 x 25 / 67 x 60 x 25 cm Working width: 50/60 cm
Tool weight without handles: 9.6 / 10.3 kg Suitable size of wooden handle: 130 x 4 cm (2 pieces)
The set does not contain wooden handles.
After each use, the tool must be cleaned, dried and stored in a dry place. If you are not planning to use the tool for a longer period of time, coat the tool with suitable oil. Keep the product out of the reach of children due to sharp parts (forks).
The tool is used for root trimming, digging, soil crushing, and aerating of working surface. It can be used without a front end (10) when only aeration and digging (without crushing) is desired, which is suitable for winter tillage.
When using it for hard soil, it is important to first pin the forks only to half the depth by breaking up the hardened part, then moving back a few inches, depending on the hardness of the ground. If you come across harder objects (root, stone) DO NOT continue to work by force, otherwise deformation and damage to the tool may occur.
Tool assembly (detailed pictorial description on our website).